COMPANY NEWS
HOME > ABOUT US > COMPANY NEWS
-
New Product: Electromagnetic Interference Intelligent Detector
Background: With the rapid development of electronic technology, with the emphasis on external radiated interference (EMI) of electronic products, railways, electric power and other industries have clearly proposed technical standards and required mandatory implementation. Purpose: Used for EMI interference analysis of electronic products and important devices. It can quickly and accurately locate the interference source and radiation path; analyze the intensity distribution; compare and analyze the problem product before and after improvement. Purpose: This equipment effectively provides a practical means of EMI quantitative analysis. It is a powerful tool for analysis, improvement, compliance and quality in product development, which greatly improves development efficiency.
2022-02-10 -
New Product: Power Quality Online Monitor (Non-contact)
With the rapid development of China's Industrial Science and technology modernization, the loss caused by power quality is becoming more and more serious. Including finance, communication, data center, semiconductor, precision processing, electronics and modern service enterprises have put forward high requirements for power quality. It is of great significance to strengthen the power quality monitoring of power grid. Non contact power quality online monitoring adopts unique non-contact voltage detection technology, which is safe and reliable. It can continuously monitor power quality parameters such as frequency deviation, voltage deviation, voltage fluctuation and flicker, three-phase imbalance, temporary or instantaneous overvoltage, waveform distortion (harmonic), voltage sag, interruption and rise.
2022-02-10 -
New Product: Intelligent Monitoring Terminal for Arrester Working Conditions
Lightning damage is one of the main factors affecting the safety of power grid operation. Due to the low insulation level of the distribution network system and generally no lightning protection wire, lightning strikes are particularly prominent. At present, as the main means of lightning protection in distribution networks, lightning arresters are widely used in distribution lines and distribution transformers. In areas where lightning activities are relatively frequent, the failure rate of arresters has remained high. Faced with the large quantity and wide distribution of arresters, it brings huge manpower and economic pressure for power outage maintenance and troubleshooting. For this reason, our company has specially developed a lightning arrester working condition Internet of Things monitoring system. This monitoring unit has passive wireless (no external power supply, wireless transmission), low power consumption, GPS positioning, comprehensive lightning current parameter monitoring: peak value, effective value, wave head, duration, energy, frequency and other related parameters. Through the synchronous detection of time, environmental parameters, and electrical parameters of the arrester, the use of big data and neural network algorithms to effectively eliminate the impact of environmental factors such as pollution, temperature, humidity, and interphase capacitance, coupled with multiple international and industry standards such as Qrs, impact times, leakage current and other international and industry standards, it can effectively predict and judge the working conditions of the arrester, and realize the pre-judgment repair and accurate fault alarm in management.
2021-04-07 -
2020 Chinese New Year Holiday Notice
2020 Chinese New Year Holiday Notice
2021-02-05 -
New Product: Non-contact Detection of High-voltage Cables
New product recommendation: non-contact detection of high-voltage cables.
2020-07-06 -
2019 Chinese New Year Holiday Notice
2019 Chinese New Year Holiday Notice
2019-01-05 -
2018 Chinese New Year Holiday Notice
Chinese New Year Holiday Notice
2018-01-04