Three-phase four-wire AC voltage transducer
This device is a 3-phase AC voltage isolation transducer. Using the principle of electromagnetic isolation to measure the three-phase AC voltage signal, isolated and linearly output a variety of selectable standard signals. It can be widely used in AC voltage signal real-time detection and monitoring, communications, electricity, railways, industrial control and other fields.
Test conditions: auxiliary power: +24VDC, room temperature: 25°C;
Input Range: 0~600VAC;
Output: 0~5VDC, 0~10VDC, 0~20mADC, 4~20mADC;
Power supply: 12VDC, 15VDC, 24VDC;
Accuracy: 0.5;
Load capacity: ≥2KΩ (voltage output), ≤250Ω (current output);
Temperature drift: ≤500ppm/°C;
Isolation voltage: ≥2500 V DC;
Response time: ≤300 mS;
Rated power consumption: 1W (voltage output); 2W (current output);
Output ripple: ≤10mV;
Frequency range: 45~65Hz (up to 5K, please specify when ordering);
Surge impact immunity:
Power port three ± 2KV (L-N/2Ω/integrated wave)
Analog I / O port three ± 2KV (L-N/40Ω/ integrated wave);
Impulse immunity: input / power port ± 2KV, analog I / O port ± 1KV;
Input overload capacity: Voltage: 2 times the nominal value;
Operating temperature: -10 ~ 60°C; humidity: ≤95 %( no dew);
Storage temperature: -55 ~+65°C; humidity: ≤95 % (no dew).
MSK case
SK installation dimensions
Wiring diagram
Installation, wiring convenience;
High precision, low temperature drift;
Three-phase voltage independent of each other;
High reliability, can be more than 2KV surge.