Single phase AC current transducer
This device is a 1-phase AC current transducer. The input and output are not common ground, the input signal is AC current, the output signal is 0-5V. The product has good accuracy, high isolation voltage, low temperature drift, small size, easy installation, etc., in line with international standards. It can be widely used in telecommunications, electricity, railways, industrial control and other fields.
Test conditions: power supply: +12V DC, room temperature:25℃
Input range: 0~30A AC
Frequency range: 1700Hz~2600 Hz
Output: 0-5V DC
Power supply: 12VDC
Accuracy: 0.5 class
Load capacity: load ≥2KΩ
Temperature drift: ≤250ppm/℃
Operating temperature: 0~50℃
Isolation voltage: ≥2500 V DC
Response time: ≤300 mS
Rated power consumption: ≤30mW
Output ripple: ≤10mV
Frequency range: 45~65Hz (up to 5K, please specify when ordering)
Input overload capacity: 20 times the value of the measured current (Maximum 500A) (one second repeat 5 times, interval 300S)
Surge impact immunity:
Power port level ±0.5KV (L-N/2Ω/ integrated wave)
Analog I/O port level±0.5KV (L-N/40Ωintegrated wave)
Impulse immunity: input / power port ±2KV, Analog I /O port±1KV
Operating temperature: 0~50℃; humidity: ≤95%( no dew)
Storage temperature:-55~65℃; humidity: ≤95%(no dew)
Outline drawing of CE-IJ03-32CD
Dimension drawing of CD case style
Wiring diagram of CE-IJ03-32CD with voltage output
High accuracy, more than 0.5.
Low temperature drift, not exceed the accuracy range, and stability;
High Isolation voltage, small size, easy installation and so on;