Self-power one input one output DC current signal isolator

This product is a single-phase passive signal isolator, no external auxiliary power supply. The use of electromagnetic isolation principle, can isolated transmit DC 4 ~ 20mA signal of the input end to the output end for proportional. The input and output of the product are completely isolated from each other, and the output signal is linearly related to the input signal. It is widely used in signal isolation of a variety of 4-20mA current signal output end, reducer the various interference in site, Improve system reliability, can be applied to a variety of complex industrial site.
Test conditions: room temperature: 25℃;
Input range: 4-20mADC;
Pressure drop: <3V@20mADC (2V);
Output: 4-20mADC;
Auxiliary power: passive;
Accuracy: 0.2;
Load capacity: ≤300Ω;
Temperature drift: ≤50ppm/℃;
Isolation voltage: 2500V DC;
Response time: ≤20mS;
Rated power consumption: none;
Output ripple: none;
Frequency response range: none;
Input overload capacity: Current: ≤50mA;
Surge immunity:
Input / output port: three 2KV (L-N / 40Ω / integrated wave);
Impulse immunity: none;
Operating temperature: 20~70℃; humidity: ≤95%((no dew);
Storage temperature: -40~+70℃.
MS1 case
Installation dimensions
No separate external power supply circuit;
To obtain energy from the input power to transmit the input signal to the output side;
High precision products, better than the accuracy level;
low temperature drift, good stability;
Input and output are full isolation, anti-jamming performance.