This device is an electrical isolation transducer of single-phase active or reactive power and power factor measurement. Its input signal is completely isolated from the output signal. Output the linear standard analog signal, can be switched to active or reactive power factor measurement through the internal switch. The product can be widely used in electric power, communications, railway, industrial control and other fields.
Power supply: DC +11V~+28V (power consumption<60mA), AC/DC 85V-265V;
Input range: voltage AC: 0~500V; current AC: 0~300A(D case up to 200A);
Power factor transmitter need to subjoin:
Power factor 0~1(unipolarity), 0.01L~1~0.01C (bipolarity);
Output: output a one-way voltage and current at the mean time,
eight kinds of output of 0-5V/0-20mA, 1-5V/4-20mA, 2.5±2.5V/10±10mA, 3±2V /12±8mA, can be set freely;
Output ripple: <10mV;
Working temperature: -20℃~+70℃;
Accuracy class: 0.5 (with reference error);
Temperature drift: <200ppm/℃;
Isolation voltage: DC 2500V;
Load capacity: voltage output≥500Ω, current output≤300Ω
(24V DC power supply can be up to 800Ω);
Response time: ≤300 mS;
Frequency range: 40Hz~75Hz;
Surge immunity:
Power port four 4KV (L-N / 2Ω / integrated wave),
Output port two 2KV (L-N / 40Ω / integrated wave);
Impulse immunity: input/power port ± 2KV, analog I/O port ± 1KV;
Input overload capacity:
Continuous overload: 120%; short-term overload,
2 times the rated voltage input value, the application of 1 second, 20 times the rated current input, the application of 1S;
Storage conditions: -40 ~ +70 ℃.
DS5 case
ES5 case
Installation dimensions
True RMS measurement, the accuracy is better than 0.5;
The product has a active or reactive power and power factor measurement function;
Can be free to set positive and negative power measurement or the inductive and capacitive polarity measurement of power factor;
DC wide power supply: 11V~28V, AC 85V~265V;
A variety of output range and mode to choose from, built-in function switch freely selected.