This device is an electrical isolation transducer of DC power measurement. By converting the measured input voltage and current into DC power to transmit output, Through the internal switch can switch a variety of output types, while with polarity switching function can be unipolar or bipolar measurement, The product can be widely used in DC power supply cabinet and DC power supply system detecting.
Test Conditions:
Power supply: DC +11V~+28V,AC/DC 85V-265V;
Input range: voltage:0~500V DC, current: 0~5A DC;
Output: 0-5V/1-5V/0-20mA/4-20mA or 2.5±2.5V/3±2V/ 10±10mA/12±8mA(bipolarity measurement)can be set freely;
Output ripple: <14mV;
Working temperature: --20~60℃;
Accuracy class: 0.5;
Rated power consumption: <0.8W;
Temperature drift: <200ppm/℃;
Isolation voltage: no isolation;
Load capacity: voltage output≥1KΩ, current output≤300Ω;
Response time: ≤ 250 Ms;
Frequency range: none;
Output ripple: ≤14mV;
Input overload capacity:
Continuous overload: 120%; short-term overload,
2 times the rated voltage input value, the application of 1 second;
20 times the rated current input, the application of 1S;
Impulse immunity: none;
Surge immunity: none;
Storage conditions: none.
Case Type
Installation dimension
Wiring diagram of voltage output of CE-P03-34MS3/ CE-P03-84MS3
wiring diagram of current output of CE-P03-44MS3 /CE-P03-54MS3
(Note: voltage and current input are in common ground, the current signal can only be taken from the negative pole)
(Note: This product output is not isolated):
Ø Good stability, accuracy better than 0.5;
Ø Output 0-5V/1-5V/0-20mA/4-20mA can be chosen freely
Ø With unipolar, bipolar measurement settings selection function;
Ø Wide power supply, with 12V/24V power supply;
Ø Built-in function switch can be set freely;